Shower Tray Crack Repair in London
- Shower tray repairs from £225
- Colour-matched repair
- 12-month repair guarantee
- Covering London, Surrey and Kent
Shower Tray Repairs London
RepairMan UK provides specialist shower tray crack repairs across London and Surrey, using fibreglass reinforcement and colour-matched finishes to restore both the strength and appearance of the damaged area, without the cost and disruption of a full replacement.
Shower Tray Repair Guarantee
Whether the crack has been caused by poor support underneath the tray, general wear over time, or impact damage from a dropped shower head or bottle, we can usually complete the repair in a single visit. Every shower tray repair includes a 12-month guarantee.
Local Shower Tray Repair Service
We work in London, as well as across Surrey and the surrounding areas. As a fully mobile service, we come to your property — just send us a few photos, and we’ll let you know if your shower tray can be repaired.
A lot of modern shower trays look good when they are new, but many are made as light and cheap as possible. If a manufacturer saves even a small amount of material on each tray, that adds up quickly when they are producing them in large numbers. The result is that there are plenty of trays on the market that look fine at first, but are simply not strong enough to hold up well over time.
Manufacturers may offer a guarantee, but that usually only covers the tray itself if it has been installed exactly to their instructions. In reality, the tray is often the cheapest part of the whole job. Once you add labour, plumbing, re-fitting and sometimes tiling, replacing a cracked shower tray can easily become a much bigger expense.
Poor installation is the other major cause. If the tray is not properly supported underneath, it will flex under load, and that movement often leads to cracks, especially around the waste and other stress points. Cracks can also be caused by impact damage, for example from dropping a shower head, a shampoo bottle or a large shower gel bottle onto the tray. That is why, in many cases, the repair is only part of the job. Creating proper support underneath the tray can be just as important if the repair is going to last.
Over the years, we have developed our own repair methods that are proven to last. We use strong fibreglass materials and resin to reinforce the damaged area properly, and once repaired, the area is strong enough for normal use. Most repairs can also be carried out without leaving an obvious lump in the tray, so there is no need to worry about water sitting around a raised patch in the middle.
Recent Shower Tray Crack Repairs in London
Here is a selection of recent shower tray crack repairs we have completed across London, showing real before-and-after results.
Cost-Effective Alternative
Repairing a cracked shower tray is usually much cheaper than replacing it. When the rest of the tray is still in good condition, a professional repair can save the cost, mess and disruption of fitting a new one.
Durable Crack Repairs
Professional shower tray crack repair can help restore both the strength and appearance of the damaged area. We repair many types of cracks, including damage around the waste, corners and other high-stress areas.
Avoid Full Replacement
Replacing a shower tray can be more disruptive than most people expect, especially if sealant, the enclosure or surrounding areas need to be disturbed. Repair is often the simpler option when the damage is limited to one area.
Shower Tray Repair Reviews
We are proud of our genuine customer feedback, collected directly from Google and displayed here for full transparency.
How do we repair a cracked shower tray?
Thorough Inspection
The first step in any shower tray repair is a careful inspection to identify all visible and hidden cracks. What appears to be a minor crack can often be part of a wider network of fractures that are not immediately obvious.
Surface Preparation
Once the damage has been identified, the shower tray is thoroughly cleaned to remove soap residue, grime and debris. The surface is then lightly roughened to ensure strong adhesion for the repair materials.
Crack Repair and Reinforcement
We carefully open the cracks to create a V-shaped groove, allowing the resin to bond securely. The resin fills the damaged area and bonds the separated sections together. To further strengthen the repair, the area is reinforced with durable fibreglass material.
Sanding and Smoothing
After the resin has fully cured, the surface is sanded smooth. A fine filler is then applied to remove any remaining imperfections and sanded again to achieve a seamless finish.
Colour Matching and Spraying
We carry out precise colour matching by mixing pigments to match the original shade of your shower tray. Once the correct tone is achieved, the repaired area is professionally spray-painted to blend naturally with the rest of the surface.
Ensuring Proper Support
In many cases, addressing the support beneath the shower tray is essential for a long-lasting repair.
If the tray is raised and has a removable side panel, we can build a strong support system using adjustable legs and plywood.
For trays that sit flat to the floor and show movement due to poor support, we may drill small access holes and inject expanding foam beneath the tray. This method carries some risk and is used only when no better option is available, but it can provide the stability required for a successful repair.
Final Inspection
The final step is a full inspection to ensure the repair is smooth, strong and fully functional. This thorough approach ensures your shower tray not only looks good but is also reinforced for long-term use.
Materials We Work With
We repair most types of shower trays, including acrylic, stone resin and fibreglass, as well as chips in enamel-coated steel trays. Each material requires a slightly different approach, which is why professional assessment is essential for a durable result.
Shower Tray Crack Repair FAQs
A: The time required depends on the extent of the damage. Minor repairs typically take 1–2 hours, while more extensive work may take up to 3–4 hours. We always assess the damage first and provide a clear timeframe before starting.
A: Yes. All our shower tray crack repairs come with a 12-month guarantee, giving you peace of mind and confidence in the quality of our workmanship.
A: Shower trays usually crack due to poor installation, structural flexing, or general wear over time. Understanding the cause is essential to ensure the repair lasts. We’ve written a detailed guide on what causes shower trays to crack to help you identify the root of the problem.
A: Common signs include visible cracks, discolouration, movement underfoot, or water leaking around the tray. If the tray feels spongy or unstable, it often indicates a support issue that should be assessed.
A: While small cracks may appear easy to fix using DIY kits, these solutions rarely address underlying problems such as poor support or deeper fractures. Professional repair provides a safer, longer-lasting result and helps prevent recurring damage.
A: While DIY kits are inexpensive, they often provide only a short-term cosmetic fix and fail to address underlying structural issues, which can lead to leaks later on. You can read more about why shower tray repair kits often fail.
Our Bath Repair Services
Whether you need a simple chip repair, a cracked sink repair, or a shower tray crack repair, we offer a full range of professional bathroom repair services. We use high-quality materials and proven techniques to deliver reliable, long-lasting results.
Explore our services below by clicking on the photos.
Bath Chip Repair
Shower Tray Crack Repair
Sink Crack Repair
